Back to Research Reports

Research Reports: Fouling

F-1 The Effect of Corrosion Inhibitors on the Fouling Characteristics of Cooling Tower Water (1987)
F-2 Final Report of the HTRI/TEMA Joint Committee to Review the Fouling Section of the TEMA Standards (1988)
F-3 The Effects of Selected Corrosion Inhibitors on the Fouling Characteristics of Cooling Tower Water (1989)
F-4 Design Fouling Resistances: Recommended Good Practice (1989)
F-5 Organic Fouling - The State of the Art (1991)
F-6 The Fouling Characteristics of a Crude Oil (1993)
F-7 The Effect of Corrosion Inhibitors on the Fouling Characteristics of Cooling Tower Water (1995)
F-8 Cooling Tower Water Fouling Summary (1999)
F-9 Quantifying Petroleum Fouling of Refinery Heat Exchangers: A Literature Survey (1999)
F-10 Fouling Data for Six Crude Oils (2001)
F-11 Comparison of Crude Oil Fouling on Plain and Finned Tubes in Longitudinal Flow (2001)
F-12 Improved Use of Fouling Allowances in Heat Exchanger Design (2002)
Q6-1 Fouling of Middle Distillate Blends (2002)
F-13 Analysis of HTRI Crude Oil Fouling Data (2003)
F-14 Wax Fouling (2005)
F-15 Crude Oil Fouling Case Study: Mechanism Identification and Mitigation (2007)
F-16 High Temperature Fouling Unit Redesign - Part I: Annular Test Section (2007)
Q11-4 The HTRI General Cooling Water Fouling Method (2007; rev 07/2008)
F-17 Tubeside and Shellside Shear Stress for Single-Phase Flow (2008)
Q12-1 Design Guidelines for Crude Oil Preheater Fouling Mitigation (2008)
F-18 Designing Heat Exchangers for Fouling Service: Cooling Water and Crude Oil Preheat (2009)
F-19 Intube Fouling: Effects of Roughness and Deposit Thermal Conductivity (2009)
F-20 Neural Network Analysis of HTFU Crude Oil Fouling Database (2011)
F-21 Fouling Assessment of a Desalted Crude Oil (2012)
F-22 Fouling Propensity of Desalted Crude Oil No. 18: Stainless Steel vs. Carbon Steel (2013)
F-23 A Review of Predictive Models for Crude Oil Fouling (2014)
F-24 Demonstration of RFU as Research Tool (2017)
F-25-TR Standardized Chemical Characterization Tests Relating to Crude Oil Fouling (2020)
F-26 Evaluation of Methods to Predict Hydrocarbon and Crude Oil Viscosities from Low Temperature Measurements (2020)
F-27-TR HTRI Crude Oil Fouling Standard Evaluation Test Matrix (2022; revised 04/2022)
F-28 Mechanistic Investigation of Fouling of Heat Exchangers Caused by Asphaltene Deposition (2023)
F-29 Characterization of HTRI Crude Oils Nos. 18, 19, and 20 and Fouling Deposits from Crude Oil No. 19 (2023)
F-30-TR Evaluation of Measurement Techniques for Crude Oil Particles (2024)